Placing Models in the Schematic View Interactively

To interactively place the models in an extracted view:

1. Click  (Create Extracted View) on the toolbar of the assistant.
   The Create Extracted View form is displayed. This form shows the library, cell, and view name for the extracted view. All available model files for the layout are listed in the Model Files list.
2. Select the Interactive Mode check box.
3. Use the Add and Remove commands to modify the Model Files list so that it contains all the files to be included in the extracted view.
4. Click OK.
   The Place Components form is displayed. All the components for which models are available are displayed in the All Components list.
   
5. Select a mapped device in the All Components list. 
6. Click Place Selected Instances.
   The extracted view is displayed and the original instance of the selected device removed from it. Instead, an instance of model is highlighted  in purple and attached to the mouse pointer.
   
7. Move the pointer and place the instance at the required location. 
8. (Optional) Reconfigure the connections of the placed device model.
   After the model is successfully placed on the extracted view, the device name is moved to the Connected Components list on the Place Components form.
9. After all the devices are placed on the schematic view, close the Place Components form.