modgenPToTTrimTrunks

layoutXL modgenPToTTrimTrunks cyclic { "None" | "Both" | "Left/Bottom" | "Right/Top" }

Description

Specifies the side from which trunks need to be trimmed while routing. The following options are available:

• None: Trunks are not trimmed.
• Both: Trunks are trimmed from both the ends.
• Left/Bottom: Trunks are trimmed along the left and bottom edges. Trunks are trimmed to the last twig connection.
• Right/Top: Trunks are trimmed along the right and top edges. Trunks are trimmed to the last twig connection.

The default value is None.

GUI Equivalent

None

Examples

envGetVal("layoutXL" "modgenPToTTrimTrunks")

envSetVal("layoutXL" "modgenPToTTrimTrunks" 'cyclic "Both")

envSetVal("layoutXL" "modgenPToTTrimTrunks" 'cyclic "Left/Bottom")