---

SPECTRE Video Library

---

Videos Available with SPECTRE

The following table summarizes the videos with narration that are accessible from Cadence Online Support. These videos are applicable to the SPECTRE 19.1 release unless stated otherwise.

See “Additional Learning Resources” for details on how the videos are played. For a more comprehensive set of videos, see the Cadence Video Library on Cadence Online Support.

Notes:

• Use the Online Support links to access these videos on Cadence Online Support.
• The following table includes the videos that are available in the Video Library.
  

  SPECTRE
  Performing Noise Simulation in Spectre RF Using the Improved Pnoise and Direct Plot Form Options Online Support | 7 mins | SPECTRERF	Introducing the Enhanced hb and hbnoise Analyses Options in ADE Explorer Online Support | 6 mins | SPECTRERF
  Large Signal S-parameter Simulation (LSSP) Online Support | 4 mins | SPECTRERF	Measuring Phase Noise of Oscillators Online Support | 3 mins | SPECTRERF
  Rapid IP3 Measurement Online Support | 3 mins | SPECTRERF	Triple Beat Analysis Online Support | 3 mins | SPECTRERF

Training Bytes Videos

The following table lists the recommended videos that are part of the Cadence Training courses. These videos are known as Training Bytes and are applicable to the SPECTRE 19.1 release unless stated otherwise.

To view the entire list of the Training Bytes videos on Cadence Online Support, choose Self Learning – Training Bytes (Videos). You can filter the search results using one of the following options:

• Use the Filter Results feature available in the left pane to view a list of product-specific or platform-specific videos.
• Type keywords in the Search in Training Bytes (Videos) search box.
  

  SPECTRE Training Bytes
  Performing Fault Analysis in Spectre using Legato™ Reliability Solution	Spectre Simulator Fundamentals S4: Measurement Description Language
  Performing Sensitivity Analysis with Spectre	Spectre eXtensive Partitioning Simulator for Mixed-Signal Designs
  Running XPS MS Simulation using the Post Layout Settings in Virtuoso ADE Explorer	Analyzing Spectre Simulation Results in ViVA
  Performing Noise Simulation in Spectre RF Using the Improved Pnoise and Direct Plot Form Options	Demystifying Noise Simulation in RF Circuits Spectre APS and RF Option
  Determining the Circuit Stability Using Stability (stb) Analysis	Performing Pole-Zero Analysis from the Spectre Command-Line Environment
  Creating Checkpoints and Restarting a Simulation in Spectre Command Line	Enabling Spectre Diagnose Mode
  Performing DC Sweep Analysis in Spectre Command Line	Determining the Operating Point Information in Spectre Command Line
  Creating Save States and Restarting a Simulation in Spectre Command Line	Spectre Simulator Fundamentals S2: Large-Signal Analyses
  Setting and Controlling Initial Conditions during Transient Analysis	Modifying Accuracy and Integration Method during Spectre Transient Analysis
  Setting and Controlling Initial Conditions during Transient Analysis	Modifying the Accuracy and Integration Method during Spectre Transient Analysis
  Spectre Simulator Fundamentals S3: Small-Signal Analyses	Spectre Simulator Fundamentals S1: Spectre Basics
  Using Spectre MDL for Measurements	How to encrypt a Verilog-A Source
  Performing Loopfinder Analysis in Spectre Command-line Environment	Filtering AHDL Linter Messages
  Enabling AHDL Linter in the Virtuoso ADE Environment	Identifying AHDL Linter Messages and Summary
  Getting Help on AHDL Linter Messages	How to Enable AHDL linter from the Spectre Command-line Environment?
  Using the alter statement	Controlling Spectre Outputs during Run Time
  Setting Up and Running Spectre Simulation in ADE Explorer	Controlling Spectre Outputs Using the Environment Variable Setting
  Running Spectre simulation using the Simulation Configuration File	Examining the effects of TRISE/DTEMP Parameters
  Using the info statement	Protecting Proprietary Information in a Netlist
  Saving Individual Nodes and Components	Controlling the Simulation Output Messages
  Parameterizing a Netlist in Spectre	Running Spectre Simulation from the Command-line
  Using Spectre MDL for Measurements	Spectre MDL Post-Processing
  Running Spectre Simulation from the Command-line	How to Manually Converge a Spectre DC Analysis
  Using Simulator MDL for Measurements	Finding the number of licenses checked out during Spectre simulation
  Post-Layout Settings in Spectre APS	Finding the licenses required for Spectre simulation
  What’s New with save and currents parameters of the options statement?	Using the Dynamic Parameter Option in Virtuoso ADE for a Spectre Transient Analysis
  Using the Compression Option in Virtuoso ADE for a Spectre Transient Analysis	Using the Diagnose Option in Virtuoso ADE for a Spectre Transient Analysis
  Evaluate the Discrete Fourier Transform after a Spectre Transient Analysis in the Virtuoso ADE	Using Spectre and the Fourier Component from analogLib to Evaluate the Fourier Transform Using the Fourier Transform in Virtuoso ADE
  Create Nyquist Plots to Determine Stability Using a Spectre Simulation from the Virtuoso ADE	Run a Spectre Transient Noise Analysis from the Virtuoso ADE
  Performing Spectre Noise Analysis Using the Virtuoso ADE	Setup and Run a Stability Analysis in the Virtuoso ADE with the Spectre Simulator
  Printing the Noise Summary from Virtuoso ADE Post Spectre Noise simulation	Plot the Transfer Function from Nets, Nodes and Terminals to the Output From the Virtuoso ADE Using the Spectre Simulator
  Specialized Spectre AC Analysis: Compression Distortion Summary	Specialized Virtuoso Spectre AC Analysis: Rapid IP3
  Running Post-Layout APS Simulation with dspf_include in ADE	Running Post-Layout APS Simulation with Extracted Views in ADE
  Setting Up and Running EMIR Analysis in Virtuoso ADE	Simulating a Design Using APS in ADE
  Simulating a Design Using XPS in ADE	How to Measure Noise Figure of Low Noise Amplifier (LNA)
  Spectre MDL Post-Processing	Analog IP Verification Seminar, ADC Verification Methodology, Best Practices
  Analog IP Verification Seminar, PLL Block Examples	Save and Plot Operating Point Parameter for Transient and DC sweep and Save Subckt Instances in ADE L & ADE XL
  Analog IP Verification Seminar, Simulations for SAR ADC, Effective Number of Bits (ENOB)	Analog IP Verification Seminar, ADC Transient SINAD Measurement
  Analog IP Verification Seminar, SAR ADC design and verification	Analog IP Verification Seminar, Clock Generator Measurements
  Analog IP Verification Seminar, Verification Methodology: Spectre APS, RF and AMS Designer, Best Practices	Analog IP Verification Seminar, Closed-Loop Output Phase Noise
  Analog IP Verification Seminar, Capacitor DAC Measurements	Analog IP Verification Seminar, PLL Overview
  Supporting The Pspice	Analog IP Verification Seminar, Data Converter - ADC
  Simulating a Design Using APS in ADE	Analog IP Verification Seminar, Phase Domain Model
  Analog IP Verification Seminar, Phase-locked Loop	Analog IP Verification Seminar, In Closing

Return to top