Customizing Displayed Coloring

The default coloring is shown in Color Representations. You can customize the coloring for Multiple Patterning data by defining color display packets that are sub-packets for the layer-purpose pair (LPP).

1. In the techDisplays section of the ASCII technology file, specify the packet name of the layer-purpose pair of interest.
2. Use the following names for the sub-packets in the display.drf file, where the coloring information is specified.
   

   <packet_name>	Display packet for the uncolored LPP
   <packet_name>_c1	Display packet for mask1Color unlocked LPP
   <packet_name>_c2	Display packet for mask2Color unlocked LPP
   <packet_name>_c1L	Display packet for mask1Color locked LPP
   <packet_name>_c2L	Display packet for mask2Color locked LPP
   <packet_name>_black	Display packet for a blackColor blockage object
   <packet_name>_multi	Display packet for a multiColor blockage object

   Not all sub-packets are required. Since only blockage objects can be assigned blackColor or multiColor, only blockage display packets should define _black and _multi sub-packets. Blockages also cannot be color locked, so _c1L and _c2L sub-packets for a blockage display style are not needed.

Related Topics

Enabling the Multiple Patterning Color Engine

Coloring Method

Getting the Coloring Method

Modifying the Default Multi-Patterning Environment Variable Settings

Colored Shapes Display