General 1801 Command Support
In the IC6.1.8 and ICADVM20.1 releases, Power Manager supports 1801 commands as explained below:
-
All 1801 commands are imported from the given 1801 file. The schematic connectivity in the 1801 Import flow happens according to the commands supported by the Power Manager.
-
All supported commands and arguments are read from the tool and exported to a 1801 file.
The following table lists all the general 1801 commands and explains how they are supported in the 1801 import and export processes of Power Manager. All supported commands are indicated with an S and the unsupported commands with a U.
|
Command
|
Options
|
Valid in IEEE 1801 Version
|
Comments
|
Support for 1801 Import
|
Support for 1801 Export
|
|
create_power_domain
|
2.0
|
2.1
|
|
S
|
S
|
|
|
-elements
|
2.0
|
2.1
|
|
S
|
S
|
|
-include_scope
|
2.0
|
2.1
|
Deprecated in 2.1
|
S
|
S
|
|
-supply
|
2.0
|
2.1
|
|
S
|
S
|
|
-scope
|
2.0
|
2.1
|
Deprecated in 2.1
|
S
|
S
|
|
-update
|
2.0
|
2.1
|
|
S
|
S
|
|
create_supply_port
|
2.0
|
2.1
|
|
S
|
S
|
|
|
-direction
|
2.0
|
2.1
|
|
S
|
S
|
|
create_supply_net
|
2.0
|
2.1
|
|
S
|
S
|
|
|
-resolve
|
2.0
|
2.1
|
|
S
|
S
|
|
connect_supply_net
|
2.0
|
2.1
|
|
S
|
S
|
|
|
-ports
|
2.0
|
2.1
|
|
S
|
S
|
|
create_supply_set
|
2.0
|
2.1
|
|
S
|
S
|
|
|
-function
|
2.0
|
2.1
|
|
S
|
S
|
|
|
-update
|
2.0
|
2.1
|
|
S
|
S
|
|
associate_supply_set
|
2.0
|
2.1
|
|
S
|
S
|
|
|
-handle
|
2.0
|
2.1
|
|
S
|
S
|
|
set_port_attributes
|
2.0
|
2.1
|
|
S
|
S
|
|
|
-applies_to
|
2.0
|
2.1
|
|
S
|
S
|
|
|
-ports
|
2.0
|
2.1
|
|
S
|
S
|
|
|
-elements
|
2.0
|
2.1
|
|
S
|
S
|
|
|
-attribute
|
2.0
|
2.1
|
|
S
|
S
|
|
|
-driver_supply
|
2.0
|
2.1
|
|
S
|
S
|
|
|
-receiver_supply
|
2.0
|
2.1
|
|
S
|
S
|
|
|
-repeater_supply
|
2.0
|
2.1
|
Deprecated in 2.1
|
S
|
S
|
|
add_port_state
|
2.0
|
2.1
|
|
U
|
S
|
|
|
-state
|
2.0
|
2.1
|
Not needed for 1801 Import
|
U
|
S
|
|
add_pst_state
|
2.0
|
2.1
|
|
U
|
S
|
|
|
-pst
|
2.0
|
2.1
|
Not needed for 1801 Import
|
U
|
S
|
|
|
-state
|
2.0
|
2.1
|
Not needed for 1801 Import
|
U
|
S
|
|
create_pst
|
2.0
|
2.1
|
|
U
|
S
|
|
|
-supplies
|
2.0
|
2.1
|
Not needed for 1801 Import
|
U
|
S
|
|
create_power_switch
|
2.0
|
2.1
|
|
S
|
S
|
|
|
-output_supply_port
|
2.0
|
2.1
|
|
S
|
S
|
|
|
-input_supply_port
|
2.0
|
2.1
|
|
S
|
S
|
|
|
-domain
|
2.0
|
2.1
|
|
S
|
S
|
|
|
-control_port
|
2.0
|
2.1
|
|
S
|
S
|
|
|
-on_state
|
2.0
|
2.1
|
|
S
|
S
|
|
|
-off_state
|
2.0
|
2.1
|
|
S
|
S
|
|
|
-supply_set
|
2.0
|
2.1
|
|
S
|
S
|
|
define_signal_attributes
|
2.0
|
2.1
|
|
S
|
S
|
|
|
-model
|
2.0
|
2.1
|
|
S
|
S
|
|
|
-signals
|
2.0
|
2.1
|
|
S
|
S
|
|
|
-on_sense
|
2.0
|
2.1
|
|
S
|
S
|
|
|
-off_sense
|
2.0
|
2.1
|
|
S
|
S
|
|
|
-supplies
|
2.0
|
2.1
|
|
S
|
S
|
|
set_level_shifter
|
2.0
|
2.1
|
|
S
|
S
|
|
|
-domain
|
2.0
|
2.1
|
|
S
|
S
|
|
|
-elements
|
2.0
|
2.1
|
|
S
|
S
|
|
|
-source
|
2.0
|
2.1
|
|
S
|
S
|
|
|
-sink
|
2.0
|
2.1
|
|
S
|
S
|
|
|
-applies_to
|
2.0
|
2.1
|
|
S
|
S
|
|
|
-no_shift
|
2.0
|
2.1
|
|
S
|
S
|
|
|
-location
|
2.0
|
2.1
|
|
S
|
S
|
|
|
-update
|
2.0
|
2.1
|
|
S
|
S
|
|
|
-input_supply_set
|
2.0
|
2.1
|
|
S
|
S
|
|
|
-output_supply_set
|
2.0
|
2.1
|
|
S
|
S
|
|
|
-internal_supply_set
|
2.0
|
2.1
|
|
S
|
S
|
|
set_isolation
|
2.0
|
2.1
|
|
S
|
S
|
|
|
-domain
|
2.0
|
2.1
|
|
S
|
S
|
|
-elements
|
2.0
|
2.1
|
|
U
|
S
|
|
-source
|
2.0
|
2.1
|
|
U
|
S
|
|
-sink
|
2.0
|
2.1
|
|
U
|
S
|
|
-diff_supply_only
|
2.0
|
2.1
|
|
S
|
S
|
|
-isolation_supply_net
|
2.0
|
2.1
|
|
S
|
S
|
|
-update
|
2.0
|
2.1
|
|
S
|
S
|
|
-applies_to
|
2.0
|
2.1
|
|
S
|
S
|
|
-clamp_value
|
2.0
|
2.1
|
|
S
|
S
|
|
-no_isolation
|
2.0
|
2.1
|
|
S
|
S
|
|
-isolation_signal
|
2.0
|
2.1
|
|
S
|
S
|
|
-isolation_sense
|
2.0
|
2.1
|
|
S
|
S
|
|
-location self
|
2.0
|
2.1
|
|
S
|
S
|
|
-location parent
|
2.0
|
2.1
|
|
S
|
S
|
|
load_upf
|
2.0
|
2.1
|
|
S
|
S
|
|
|
-scope
|
2.0
|
2.1
|
|
S
|
S
|
|
set_scope
|
2.0
|
2.1
|
|
S
|
S
|
|
|
Instance
|
2.0
|
2.1
|
|
S
|
S
|
|
begin_power_model
|
|
2.1
|
|
U
|
S
|
|
|
power_model_name
|
|
2.1
|
|
U
|
S
|
|
|
-for model_list
|
|
2.1
|
|
U
|
S
|
|
add_power_state
|
|
2.1
|
|
U
|
S
|
|
|
-state
|
|
2.1
|
|
U
|
S
|
|
-supply_expr
|
|
2.1
|
|
U
|
S
|
|
-logic_expr
|
|
2.1
|
|
U
|
S
|
|
-simstate
|
|
2.1
|
|
U
|
S
|
|
end_power_model
|
|
2.1
|
|
U
|
S
|
Return to top
