Process Rule Override Editor Form
To open the Process Rule Override Editor form, double-click a constraint group. The Process Rule Override Editor form has the following components:
|
Toolbar
|
Lets you copy and delete a constraint.
|
|
Fields
|
Lets you specify the options for bus constraints.
|
Toolbar
The following table lists the functions of the different buttons on the Process Rule Override Editor form toolbar.
|
Icon
|
Command
|
Description
|
|
|
Copy Constraint Group
|
Lets you copy the constraint group.
|
|
|
Delete Constraint Group
|
Lets you delete the constraint group.
|
Fields
The Process Rule Override Editor form lets you specify the options for bus constraints.
|
Field
|
Description
|
|
Constraint Group Name
|
Lets you select a constraint group to use for seeding the values.
|
|
# Via Cuts
|
Specifies the number of cuts for each cut layer matching a valid via.
|
|
Top Layer
|
Lets you select the preferred top routing layer.
|
|
Bottom Layer
|
Lets you select the preferred bottom routing layer.
|
|
Width/Space
|
Toggles to display the width and spacing layer table.
|
|
Layer
|
Displays the name of the layer.
|
|
Min W
|
Lets you specify the minimum width to be used for the layer.
|
|
Max W
|
Lets you specify the maximum width to be used for the layer.
|
|
Min S
|
Lets you specify the minimum spacing to be used for the layer.
|
Related Topics
Opening Routing Constraint Manager
Virtuoso Routing Constraint Manager
Routing Constraint Manager User Interface
Return to top
