Show Registers Form
Use the Show Registers form to display the waveforms produced during a simulation in register format.
The following table describes the fields available in the Show Registers form.
|
Field
|
Description
|
|
Simulation Run Directory
|
Specifies the name and path of the current simulation run directory as a read-only field.
To change the directory, click Cancel and select the Initialize command again.
|
|
Waveform File Name
|
Specifies the name of the waveform file to display.
The system expects this file to be within /run_dir/raw. The default waveform file is waves. Most of the standard interfaces do not require that you change this field. If you are using a tool that produces multiple waveform files, such as the Cadence HSPICE interface, you need to change this field to look at the waveforms for each analysis run.
|
Related Topics
Viewing Waveform Results in Register Format
Initialize Environment Form
Initializing the Simulation Environment
The Simulation Menu
Return to top
