Static HighZ Node Check (static

Reports the nodes that do not have any possible conducting path to a DC power supply or ground.

The results are written to the static.xml file, which can be viewed in a Web browser. This check is supported only by XPS and APS.

Name static_highz parameter=value ...

Design check parameters


`node`	`[...]`	Nodes to which the check is applied. Default is none.
`fanout`	`all`	Fanout setting to filter node with specified connection. When fanout=gate_has_driver_no_moscap, floating nodes only connecting to MOSCAPs will not be checked. When fanout=gate_no_moscap, gates only connecting to MOSCAPs will not be checked.Possible values are all, gate, bulk, gate_has_driver_no_moscap and gate_no_moscap.
`rpt_node`	`no`	report node voltages.Possible values are no, all, top and selected.

Digitize parameters


`vpth`	`-0.4 V`	PMOS threshold voltage. This value is used to calculate the voltage drop across a PMOS channel during voltage propagation. Default is -0.4 V.
`vnth`	`0.5 V`	NMOS threshold voltage. This value is used to calculate the voltage drop across a NMOS channel during voltage propagation. Default is 0.5 V.
`vsrcnodefile`	`[...]`	Defines file from which node voltages are read for performing the check.
`pwl_time`	`infinity`	Time for pwl src to be considered as constant vsrc.

Filtering parameters


`error_limit`	`10000`	Maximum number of errors reported. Default is 10000.

Wildcard scoping


`inst`	`[...]`	Subcircuit instances to which the check is applied. Default includes all instances (inst=*).
`xinst`	`[...]`	Subcircuit instances to be excluded from the check. Default is none.
`subckt`	`[...]`	The instances of the specified subcircuit to which the check is applied. Default includes all subcircuits (subckt=*).
`xsubckt`	`[...]`	The instances of the specified subcircuits that are excluded from the check. Default is none.
`depth`	`8`	Hierarchy levels (starting from top, instance, or subcircuit scope) to be checked. Default is 8.