Create Extracted View Form

Propagates the changes done in the master schematic to the extracted view.

Field	Description
Library	The library name of the package schematic.
Cell	The cell name of the package schematic.
Reference View	The name of the view that you want to use as a connectivity reference to stitch the devices and nets from the S-parameter model. You can use a schematic view, Quantus Smart View, or another layout view as a reference.
Sparam View	The name of the extracted view where the changes are being propagated.
Coupling Capacitor Mode	Specifies how to stitch a coupling capacitor when one of the two nets attached to the capacitor is included in the model. This variable is used when the reference view used for the extracted view is a Quantus Smart View. Possible values are: `ground`: The coupling capacitor of the net excluded from the model is connected to ground. This is the default value. `position`: The coupling capacitor of the net excluded from the model is connected to the nearest surviving node of the net included in the EM model. Related environment variable: couplingCapMode
Model Files	The model files to be used for comparison. The files must be `*.snp`.