7 Design Configuration Commands

You use the Design Configuration commands to get, set, and change parameters for your design, and prepare data from third party tools. This topic lists the Design Configuration Tcl commands.

assign_term	clean_nets
collapse_shape_term	convert_routing_shapes
create_derived_vias	create_no_pref_dir_region
create_pr_boundary	create_preferred_direction_region
create_soft_fence	delete_no_pref_dir_region
delete_preferred_direction_region	delete_soft_fence
extract_net_connectivity	get_current_design
get_placement_grid	get_preferred_layers
get_route_on_grid	get_route_via_info
get_router_tax	get_routespec_taper
get_routing_grid	get_routing_style
get_soft_rule_adherence	get_sorted_route_via_list
get_treat_blockage_as_metal	get_treat_via_as_abstract
get_use_existing_shapes_for shielding	get_user_grid
get_via_grid	pattern_route
read_net_connectivity	repair_net
set_is_trunk	set_net_fix_status
set_net_priority	set_net_signal_type
set_placement_grid	set_power_type
set_preferred_layers	set_route_fix_status
set_route_on_grid	set_route_style
set_route_topology	set_router_tax
set_routespec_taper	set_routing_grid
set_routing_style	set_soft_rule_adherence
set_taper_width_nets	set_treat_blockage_as_metal
set_treat_via_as_abstract	set_use_existing_shapes_for_shielding
set_user_grid	set_via_grid
set_width_priority_nets	unassign_term
unset_preferred_layers	unset_taper_width_nets

Return to top

Virtuoso Space-based Router Command ReferenceProduct Version IC23.1, September 2023

7

Design Configuration Commands

Virtuoso Space-based Router Command Reference
Product Version IC23.1, September 2023